ATN NVG7 User Manual

ATN NVG7  
u s e r ` s g u i d e  
Export of night vision equip-  
ment and optical sighting equip-  
ment is controlled by the U.S.  
Department of State, Office  
of Defense Trade Controls in  
accordance with International  
Traffic in Arms (ITAR), Title 22,  
Code of Federal Regulations Part  
120-130and/or the Export Admin-  
istration Regulations (EAR) U.S.  
Department of Commerce. Illegal  
export of these commodities is  
strictly prohibited.  
AmericAn  
Technologies  
neTwork  
corp.  
eATres  
• High Quality 2nd or 3rd or 4th gen. light intensifier tube  
• Super fast lens system provides the user with a clear and sharp image  
• Dual eye viewing system for long viewing sessions  
• Built-in Infra Red illuminator lets you see even in total darkness  
• Interchangeble lenses for different magnification  
• Head or helmet mounted for hands free use  
• Rugged and versatile design  
• Easy to use digital controls  
• Two years warranty  
SpecificATioNS  
Magnification ..................................................1X (3X,5X optional)  
Intensifier tube................................................Gen. 2 or Gen.3 or Gen.4  
Detection range ..............................................150(Gen.2) or 200(Gen.3) or 300(Gen.4)m/y  
Recognition range ..........................................100(Gen.2) or 180(Gen.3) or 225(Gen.4)m/y  
Lens System...................................................35 mm; F1:1.2  
Field of view....................................................40°  
Range of Focus...............................................0.25m to  
Power Supply..................................................3 volt lithium  
Battery Life .....................................................10 hours  
Operating Temp..............................................-30°F to +110°F  
Dimensions.....................................................172x62x102 mm (6.7” x 2.5” x 4”)  
Weight.............................................................0.45kg (0.9 lb)  
ApplicATion  
Compact and lightweight, rugged (metal not plastic), and a top-notch performer the NVG-7 is  
an exceptional choice for hands free usage.  
The NVG-7 goggles have a built in IR for total darkness with indicator “ON” light within the FOV  
and a flip-up headset.  
The NVG-7 is available with a wide range of image intensifier options to meet a wide array of  
specification requirements.  
The NVG-7 night vision goggles is a complex opticoelectronic system for individual use. The  
device consists of the objective lens assembly, eyepiece and the body. The body contains a  
image intensifier tube assembly with an integrated high voltage power source and the battery  
housing.  
Objective lens protective cover (not shown) is intended to protect the objective lens from dust  
and scratches. It also will act as a daylight filter, allowing you to test the scope in daylight or  
other bright light situations. The pinhole in the center of the protective cover allows the user to  
check the operation ability of the device in daylight conditions.  
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for  
more than ten (10) minutes.  
2
operATion  
• Take the monocular out of the case.  
• Install the battery into the housing with the polarity order as shown on the scope. Battery  
Type: 3 Volt Lithium, #CR123A .  
• Press the button (short press - less than 1.5 sec.) to turn the unit on by the protective lens  
cover still attached to the lens. Do not turn the unit on in the daytime without the protec  
tive lens cap on. You should see green glow in the eyepiece.  
• Observe the scene and adjust the diopter for optimal image clarity.  
• You may now enter a dark environment or simply shut the lights off in order to darken the room.  
• Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the focus.  
You should not have to readjust the diopter.  
• To turn the unit off, push the button again by short press (less than 1.5 sec.).  
ocsing  
To focus the NVG-7, first you will need to adjust the  
diopter. Simply turn the diopter clockwise until it  
stops. Then, while looking throught the diopter at an  
object, slowly turn the diopter back counter clock-  
wise until the grain in the image is sharp.  
Diopter adjasting  
NOTE: We suggest that you focus the diopter  
during daylight with the filter on.  
Next focus the front lens until the image and the  
grain are both sharp. When you are in low-light con-  
ditions and the daylight filter is off, you may focus  
the front lens to receive sharp image, the diopter  
should not be adjusted.  
Lens focus  
adjusting  
NOTE: The front lens should be readjusted as you  
view objects at different distances.  
inrA-red illminATor  
Infra-red illuminators, or IR illuminators, are common  
to night vision. The IR light greatly enhances the  
performance of the NVG-7 while remaining almost  
totally invisible to the naked eye.  
The NVG-7 goggles have a built in IR with indicator  
“ON” light within the FOV. To turn the IR on, push  
the button by long press (more than 1.5 sec.). It  
is important to remember that the IR illuminator is  
simply an infra red light source, and like any light  
source, it may loose its effectiveness over a great  
distance.  
Built-in Infra-red  
Illuminators  
To turn the IR off, push the button again by long  
press (more than 1.5 sec.).  
NOTE: The IR will automatically turn off when the unit’s  
power is turned off.  
3
flipup heaDSet  
fittinG the heaDGeaR  
1
1) Fit the headgear to your head size. Adjust the head-  
gear fist before attaching the NVG-7 to it.  
3
2) Loosen all the straps and place the headgear onyour  
head.  
3) Tighten the straps until the headgear fits firmly.  
GooGleS inStallation anD aJuStment  
2
4
Now you are ready to mount the NVG-7 on to your  
headgear.  
1) Remove the already adjusted headgear from your  
head.  
2) Push button [1] and insert the bracket [2] of the  
NVG-7 to the rail of the headset.  
3) Place the headgear with NVG-7 onto your head.  
4) Loosen the screw [3] and move the unit along the rail  
for eye relief adjustment .  
The NVG-7 headset has a flip-up mechanism. Push the  
button [4] on the side of mount and lift the unit up until the  
unit fixates in the top position.  
Push same button to lower NVG-7 to viewing position.  
If you need increase the eye relief of your goggles, you  
can displace the bracket on the top of NVG-7.  
1) Unscrew the screw and detach the end-cap from  
the bracket of NVG-7.  
2) Unscrew the 2 screws and detach the bracket from  
the NVG-7 body.  
3) Turn the bracket 180 degrees.  
4) Screw the 2 screws back into place.  
helmet mount  
(optional)  
Helmet mount for attachment of ATN’s NVG-7 to a standard PASGT helmet. Helmet mount fits  
securely onto helmet via a rugged strapping device and grooved hooks. With helmet mount,  
NVG-7 can be positioned directly in front of user’s eyes or flipped.  
inStallation  
1) Install the mount onto helmet as shown on the picture.  
1
2) Tighten and fixate the straps [1]  
3) Attach goggles to the rail. Push button [2] and insert  
the bracket of the NVG-7 to the rail of the mount.  
4
2
3
4) Place the helmet on your head.  
aDJuStment  
1) Loosen the screw [3] and move the unit along the rail  
for eye relief adjustment.Tighten the screw [3].  
2) Loosen the top vertical fixation screw [4]. Adjust gog-  
gle vertical position.Tighten vertical position screw.  
1
5
3) The NVG-7 helmet mount has a flip-up mechanism. Push a button [5] on the side of mount  
and lift the unit up till fixation in the top position.  
4
3X afocal lenS  
(optional)  
The NVG-7 with 3X or 5X front lens can be  
used as a powerful night vision bi-ocular.  
To install 3X Afocal Lens screw it on the  
front lens of NVG-7.  
To install 5X lens unscrew the objective  
lens of NVG-7 and screw F112 Lens to  
the free place (make sure that the unit is  
turned off).  
3X Lens  
5X Lens  
StoRaGe anD caRe  
• If the device is not to be used for extended period of time (more than 10 days) remove the  
battery.  
• Avoid touching lenses. If fingerprints or traces of dirt or dust appear, clean their surface with  
a Photographic lens cleaning tissue.  
• Keep lens cap/daylight filter on when not in use.  
• The NVG-7 is not harmful to the user or the environment.  
• Do not disassemble except to clean the front lens and eyepiece: it will void your warranty.  
• Evaluate the scope function by looking through it in a lit environment with the daylight filter  
lens cap on. never use in daylight without the daylight filter lens cap on.  
never point the nVG7 at a bright light source.  
• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light  
(moon or starlight) may diminish the effective viewing distance.  
tRouble ShootinG  
Q: Flashes, flickers, or clicking occur while operating  
S: If it occurs within the first five minutes of inserting new batteries, it is normal and the device  
will resume normal operation soon thereafter. If it occurs for more than 10 minutes, contact for  
service instructions.  
Q: Dark spots on screen.  
S: These are either cosmetic blemishes in the intensifier tube or dust particles.  
Q: Screen becomes darker than at previous use.  
S: Replace batteries. If problem persists, contact your dealer or other authorized service rep-  
resentative for service instructions.  
Q: Image not clear.  
S: Adjust objective lens, and/or the eyepiece.  
5
2 YeAr producT WArrANTY  
This product is guaranteed to be free from manufacturing defects in material and workmanship  
under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that  
is covered by the foregoing warranty occurs during the applicable period stated above, ATN, at its  
option, will either repair or replace the product, and such action on the part of ATN shall be the full  
extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not  
cover a product (a) used in other than its normal and customary manner; (b) subjected to misuse;  
(c) subjected to alterations, modifications or repairs by the Customer of by any party other than ATN  
without prior written consent of ATN; (d) special order or “close-out” merchandise or merchandise  
sold “as-is” by either ATN or the ATN dealer; or (e) merchandise that has been discontinued by the  
manufacturer and either parts or replacement units are not available due to reasons beyond the con-  
trol of ATN. ATN shall not be responsible for any defects or damage that in ATN’s opinion is a result  
from the mishandling, abuse, misuse, improper storage or improper operation, including use in con-  
junction with equipment which is electrically or mechanically incompatible with or of inferior quality  
to the product, as well as failure to maintain the environmental conditions specified by the manufac-  
turer. cuStomeR iS heRebY notifieD that opeRation of the eQuipment DuRinG  
DaYliGht houRS oR unDeR anY eXceSSiVe liGht conDitionS maY peRmanentlY  
DamaGe the inteRnal componentS of the unit anD SaiD DamaGe Will not be  
coVeReD unDeR thiS WaRRantY. This warranty is extended only to the original purchaser.  
Any breach of this warranty shall be waived unless the customer notifies ATN at the address noted  
below within the applicable warranty period.  
The customer understands and agrees that except for the foregoing warranty, no other warranties  
written or oral, statutory, expressed or implied, including any implied warranty of merchantability or  
fitness for a particular purpose, shall apply to the product. All such implied warranties are hereby  
and expressly disclaimed.  
LimiTATioN of LiAbiLiTY  
ATN will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or li-  
abilities arising out of the use of this product. Operation and use of the product are the sole respon-  
sibility of the Customer. ATN’s sole undertaking is limited to providing the products and services  
outlined herein in accordance with the terms and conditions of this Agreement. The provision of  
products sold and services performed by ATN to the Customer shall not be interpreted, construed,  
or regarded, either expressly or implied, as being for the benefit of or creating any obligation toward  
any third party of legal entity outside ATN and the Customer; ATN’s obligations under this Agree-  
ment extend solely to the Customer. atn’s liability hereunder for damages, regardless of the  
form or action, shall not exceed the fees or other charges paid to atn by the customer or  
customer’s dealer. atn shall not, in any event, be liable for special, indirect, incidental,  
or consequential damages, including, but not limited to, lost income, lost revenue, or lost  
profit, whether such damages were foreseeable or not at the time of purchase, and whether  
or not such damages arise out of a breach of warranty, a breach of agreement, negligence,  
strict liability or any other theory of liability.  
producT WArrANTY reGiSTrATioN  
In order to validate the warranty on your product, ATN must receive a completed Product Warranty  
Registration Card for each unit. Please complete the form below and immediately mail it to our  
Service Center: ATN Corporation, 20 South Linden Ave., Suite 1B, South San Francisco CA 94080.  
Products qualifying for warranty repair will be either repaired or replaced within 10 business days of  
receipt of merchandise unless the customer is notified otherwise.  
obTAiNiNG WArrANTY SerVice  
To obtain warranty service on your unit, take or send the product, postage paid, with a copy of your  
sales receipt to our service center, ATN Corporation at the address noted above. All merchandise  
must be fully insured with the correct postage; ATN will not be responsible for improper postage, or,  
missing or damaged merchandise during shipment.  
6
For customer service and technical support, please contact  
American Technologies Network Corp.  
north american office  
20 S. Linden Ave. Suite 1B, South San Francisco, CA 94080  
phone: 800-910-2862, 650-875-0130; fax: 650-875-0129  
european office  
phone: 44(0)870-0111286, fax: 44(0) 845-3349142  
The following countries can use our  
toll free number 00 800 91028620  
Austria, France, Germany, Holland, Italy, Spain, Sweden, Switzerland  
©2005 ATN Corporation  

ARC Audio XDI 6 2 User Manual
Blaupunkt Bologna C50 User Manual
Canon IEEE 1394 User Manual
Fellowes SyncMaster 2233BW User Manual
FujiFilm FinePix JX300 User Manual
GE MONOGRAM ZX36CTYSS User Manual
Hypertec Messenger 3507 User Manual
Insignia 1080p HD Digital NS DV1080P User Manual
JVC Camcorder IEEE1394 User Manual
JVC GR DVX400ED User Manual